Genus Salient Features

• DSP Technology
  The technology used in Genus Sure Sine Wave™ Inverters and Home UPS is DSP based technology that uses Auto Sense Intelligent Control (ASIC). ASIC technology gives maximum power and backup time. DSP monitors the output level and battery voltage and adjusts the amplitude and wave shape of the since wave according to that. The DSP also corrects the Power Factor while battery charging.
  
  
• Auto Reset
  Genus Sure Sine Wave™ Inverters and Home UPS have auto-reset function in case of Overload short circuits. It will reset itself automatically and will make 6 attempts for Overload. Otherwise it will shut off and you will have to reset the inverter manually by turning ON/OFF switch on its front panel.
  
  
• Protection Circuit
  Genus Sure Sine Wave™ Inverters and Home UPS are protected from low battery voltage and over current conditions. When the inverter senses one of these situations, it will protect itself by disconnecting from the load, and will signal an error condition by displaying and with a buzzer sound.
  
  
• Automatic Low Battery Cutout (LBCO)
  Genus Sure Sine Wave™ Inverters and Home UPS protects your batteries from damage caused by over-discharging, by shutting itself off when the battery voltage falls to a preset level. This feature is called the low battery cutout. Genus Sure Sine Wave™ Inverters and Home UPS comes from the factory with the LBCO voltage set at 10 Volts per battery.
  
  
• Automatic High Battery Cutout
  When battery voltage rises above 14.4 Volts per battery, the charger stops its normal charging and comes to the trickle mode so as to take care of the self-discharging of the battery. The charger automatically resumes operation when the battery voltage drops below 13.7 volts per battery.
  
  
• Over Current Cutout
  Genus Sure Sine Wave™ Inverters and Home UPS is protected from over current conditions. When the load being run demands more current then the inverter will shutdown automatically along with the display indication.
  
  
• Battery Type Optimization
  Genus Sure Sine Wave™ Inverters and Home UPS is designed to prevent damage and extend life of your batteries by regulating the charging voltage and duration. To do this, the inverter must be configured for the type of batteries in the system.
  
  
• Charge Rate Regulation
  Batteries can overheat if the charge rate is too high. Genus Sure Sine Wave™ Inverters and Home UPS protects your batteries by limiting the charging current, so that the regulation can adjust the charging current to the optimum level.
  
  
• Volts AC Dropout
  Genus Sure Sine Wave™ Inverters and Home UPS monitor the voltage of the AC power passing through to the charger and AC loads. When AC voltage falls below the preset level, the inverter automatically transfers from AC to DC power (i.e. it converts to Inverter mode). This dropout voltage is factory preset at 90-110 volts. So when the AC voltage drops to this level, the inverter automatically transfers from AC to DC power. It will revert back to mains with a hysteresis of 20V.
  
  
• Reduces Inverter's Power Consumption (GREEN MODE)
  Genus Sure Sine Wave™ Inverters and Home UPS has a circuitry design which reduces the power intake of the inverter when battery is in trickle charge mode and evaporation of battery electrolyte is also minimized improving the battery life.
  

Advantages of Sine Wave over Square Wave

Download catalogue for complete specifications and drawings (PDF File - 343 Kb)